EliteShiresProperty Services

Electrical Work

Electricians in Harrow & North West London

Electrician & Electrical Work. Fault finding, consumer units, rewires, sockets, lighting and EICR remedial work by a registered electrician.

From £60 per hour · Same-day fault finding · Harrow, Kenton, Stanmore & Edgware

Electrician & Electrical Work in Harrow
Typical price
From £60 per hour
Turnaround
Same day
Harrow · Kenton · Stanmore · Edgware
4 areas
Before we attend
Fixed quote

EliteShires Property Services provides electrical work in Harrow from £60 per hour: fault finding, consumer unit replacements, extra sockets and circuits, EV charge point supplies and EICR remedial work. Defined jobs are a fixed price. Notifiable work, such as replacing a consumer unit or changing electrics near a bath or shower, is certified and notified to Building Control, so the paperwork exists when you sell or let.

Something has stopped working, something keeps tripping, or a report has told you the installation needs attention and you have no way of judging whether the quote in front of you is reasonable or opportunistic.

Electrical work divides into two things: making something safe, and making something work. Both need someone registered, because the certification that follows the work matters as much as the work itself, and because unlike plumbing, a bad electrical job does not announce itself with a puddle.

Electrical Work at a glance

Fault findingCharged by time, from £60 per hour
Consumer units and defined jobsFixed price
PaperworkElectrical Installation Certificate or Minor Works Certificate
Notifiable workNotified to Building Control
EmergenciesSame day, in working hours

What electrical work with us includes

  • Fault finding and diagnosis
  • Consumer unit replacement and upgrades
  • Additional sockets, lighting and circuits
  • EICR remedial work, quoted against the codes
  • Earthing and bonding upgrades
  • EV charge point supplies and outside power

Fault finding

A tripping RCD, a circuit that will not reset, lights that flicker or dim under load, sockets that have stopped working, a burning smell near a fitting. Fault finding is charged by time because it genuinely varies: sometimes it is a failed appliance flooding the circuit with earth leakage and takes twenty minutes, and sometimes it is buried cable damage and takes half a day. We will tell you what we have found and what the options are before doing more than diagnosing.

Do you need a rewire or a new consumer unit?

Older installations with rewireable fuses, no RCD protection or insufficient circuits often need a consumer unit replacement rather than a full rewire, which is a fraction of the cost and disruption. A genuine full rewire is a big job and it is worth being sure it is actually needed. We will give you a straight view, and if the honest answer is that a board change plus two new circuits solves your problem, that is what we will quote.

Electrician & Electrical Work in Harrow

Additions and alterations

Extra sockets, outside sockets and lighting, kitchen and bathroom circuits, LED downlighting, extractor fans, EV charge point supplies, garden and shed supplies. Notifiable work is certified and, where required, notified to Building Control on completion, so the paperwork exists when you come to sell or let.

Get a price for your property

How it works, step by step

  1. We establish what is happening and quote the diagnosis time honestly
  2. We attend, find the fault, and explain the options before going further
  3. Work is quoted before it starts, as a fixed price wherever it can be
  4. The work is completed and certified appropriately
  5. Notifiable work is notified to Building Control, and you get the paperwork

What you end up with: The fault fixed, the correct certificate for the work, an Electrical Installation Certificate or Minor Works Certificate, and a straight answer on whether you actually need a rewire.

Why people trust us

  • Gas work, electrical inspection and energy assessment carried out under the relevant registrations, ask to see the card
  • Every price confirmed before we attend, and not revised afterwards
  • Coded observations quoted line by line, so you can take the work elsewhere
  • A time slot rather than a morning-or-afternoon window
  • Work photographed before and after, and reported
  • We tell you when you do not need something we sell

We are building a review profile under this name and would rather show you none than borrow someone else's. Ask us for references from landlords and we will put you in touch.

Who this is for

Homeowners with a fault, landlords with an unsatisfactory EICR, and anyone who has been quoted for a rewire and wants a second opinion.

Mistakes we see most often

Accepting a rewire quote without asking which specific findings require it. Many older properties need a consumer unit, earthing and bonding upgrades and one or two circuits, a fraction of the cost and disruption. Also common is resetting a tripping RCD repeatedly without identifying the cause; the RCD is doing its job, and something on that circuit is leaking to earth.

What affects the price

Whether the work is diagnosis or installation. Fault finding varies enormously (sometimes twenty minutes, sometimes half a day) so it is charged by time. Defined installation work such as a consumer unit replacement or a new circuit is quoted as a fixed price.

Whichever applies, you are given the figure before we attend and we do not revise it afterwards. If something genuinely unforeseen turns up mid-job we stop and tell you rather than adding it to the invoice.

EICR remedial work

If your Electrical Installation Condition Report has come back unsatisfactory, the remedial work is usually specific and limited: a bonding upgrade, an RCD, a handful of accessories, a rectified junction. We quote against the coded observations line by line so you can see exactly what is required to make the report satisfactory and what was only ever a C3 recommendation. You are welcome to have another contractor do the work; we will still explain what it involves.

What certificate do you get?

Work is certified appropriately (an Electrical Installation Certificate for a new installation or a Minor Electrical Installation Works Certificate for smaller alterations), and you get the paperwork, not just the invoice. That certificate is what a conveyancer, a lender or a local authority will eventually ask for.

We serve these areas

Everything on this page is available across all four areas we cover. Pick your area for local detail and prices:

Electrician & Electrical Work in your area

Local housing stock genuinely changes the job, so each area has its own page:

Booking it

Call 0203 667 1333 or use the form below. We confirm the price against your property before attending, and give you a slot rather than a vague window.

Official sources

Last reviewed September 2026 by EliteShires Property Services.

Electrician & Electrical Work: common questions

Not answered here? Call 0203 667 1333 and ask.

My RCD keeps tripping. Is that dangerous?

It means the RCD is doing its job. It is detecting earth leakage and disconnecting. The cause matters: often a single faulty appliance, sometimes water ingress, sometimes cable damage. Unplug everything on the affected circuit and reset it; if it holds, reconnect items one at a time. If it trips with nothing connected, it needs investigating properly.

Do I need a full rewire?

Far less often than people are told. Many older properties need a new consumer unit, earthing and bonding upgrades and one or two additional circuits, which achieves the safety outcome at a fraction of a rewire. Ask anyone quoting a rewire to show you which specific findings require it.

Is your electrical work certified?

Yes, with the appropriate certificate for the work (an Electrical Installation Certificate or a Minor Works Certificate), issued to you on completion, and notified to Building Control where the work is notifiable.

Can you do the remedial work from an EICR someone else carried out?

Yes, and it is a common request. We will quote against the specific coded observations in that report and tell you which items actually affect the satisfactory or unsatisfactory outcome.

Do you install EV charge points?

We install the supply and the associated protection. For the charger itself, manufacturer-specific commissioning may apply, and we will tell you where that is the case.

How much does an electrician cost?

From £60 per hour for standard work, with fixed prices for defined jobs like a consumer unit replacement. We confirm before attending.

Book electrical work

Most quotes are settled on a two-minute call. Or send the form and we will call you back.

0203 667 1333
  1. We confirm the price for your property
  2. We book a time slot that suits you or your tenant
  3. The work is done, certified and photographed
Thank you, your request has been sent. We will call you back, usually within a couple of hours during working hours.

We use your details only to reply to this enquiry. No lists, no third parties.

Visit the office

EliteShires Property Services
6 Station Parade, Kenton Lane
Harrow, Middlesex HA3 8SB

Call or email

0203 667 1333
hello@eliteshires.co.uk

Opening hours

Mon – Fri · 8:00 – 18:00
Saturday · 9:00 – 16:30
Sunday · Emergencies only

Call Get a quote